XSW-D INSTRUMENT BASE SET
XS Wireless Digital Instrument Base Set. One-touch ease-of-use wireless audio set with XSW-D 6.3mm (1/4”) transmitter, XSW-D 6.3mm (1/4”) receiver, extension cable 6.3mm (1/4“), belt clip and USB-A to USB-C charging cable
„Fantastic distance, zero signal loss, sounds like a cable.“
_

Sennheiser Star Rating

4.5 (2) Reviews


$ 379.95
excludes taxes – free shipping
XSW-D INSTRUMENT BASE SET
Article No. 508493
XSW-D INSTRUMENT BASE SET
_

Sennheiser Star Rating

4.5 (2) Reviews

$ 379.95
excludes taxes – free shipping

One-touch ease-of-use wireless audio set that utilizes a digital transmission to seamlessly link audio sources. This elegant solution makes going wireless with instruments easier than ever before while maintaining a reliable connection.

  • One touch ease-of-use

  • 2.4 GHz digital transmission for worldwide operation

  • 75m range (250ft) in optimal conditions

  • Up to 5 hours battery life on a single charge

  • Switch between multiple transmitters linked to one receiver

  • Configure any combination of transmitters and receivers

  • Mute from either transmitter or receiver


Reviews
_

Sennheiser Star Rating

4.5 (2) Reviews

100.0% of Reviewers Would Recommend this product to a friend

  • Richie
    NJ/NY
    _

    Sennheiser Star Rating

    FREEDOM. CLARITY. FUN

    The Sennheiser XSWD has inspired freedom in my playing, clarity in my tone, and fun for hours on stage, recording, or just practicing at home. It has allowed me to move and perform in ways I have never done before. From jumping off of my friend’s bass amp to taking a solo in the crowd, I’ve learned that this is the NEXT LEVEL of performance. It’s also compact and super easy to use with simple buttons that communicate via LED. It shows you if you’re connected and even where you are in your battery lifespan, which lasts up to 5 hours! At one point I forgot to charge in between two full gigs and it lasted well through both. I would recommend this to any traveling or session guitarist.

    PRO:

    - Compact - Easy to use - Increases movement on and off stage - 5 hours of battery life - LED communicates link and charge - 1/4 extension and belt clip

    CON:

    It would have been cool to have another charging cable or charging port that charges the pair at the same time.

    BEST USES:

    - Performing - Practicing - Recording

    BOTTOM LINE:

    I would recommend this to a friend.

  • Phrankenstrat
    Virginia Beach, VA
    _

    Sennheiser Star Rating

    Great But....

    So far, no response on my Warranty ticket.

    PRO:

    Great concept. Two units, base plugs into input of amp or effects unit and transmitter plugs into guitar. Fantastic distance, zero signal loss, sounds like a cable.

    CON:

    Transmitter pivot jack loosens over time. Nice idea poorly executed. Waiting on warranty response right now. Hopefully I just got a bad one but I've had about 70 shows since April 2019 and now TX doesn't work at all.

    BEST USES:

    Great for use with my Headrush as there isn't an extra pedal or power supply needed.

    BOTTOM LINE:

    I would recommend this to a friend.

Specifications
What's in the Box
  • XSW-D 6.3mm (1/4”) transmitter
  • XSW-D 6.3mm (1/4”) receiver
  • Extension cable 6.3mm (1/4“)
  • Belt clip
  • USB-A to USB-C charging cable

Training





Support
Contact Us
Product Support Phone

1-800-463-1006


FAQ
  • How do I set up XS Wireless Digital for the first time?
    XS Wireless Digital systems come pre-paired from the factory, so you can take a new system out of the box, power it up and get right to work

  • How do I select a channel / frequency?
    XS Wireless Digital automatically selects its own frequency, and will automatically switch to a new frequency if interference is detected

  • How many systems can I run simultaneously?
    Up to five (5) systems can be used simultaneously.

  • How far can XS Wireless Digital transmit?
    Up to 75m (250 ft) under ideal operating conditions.

  • Will XS Wireless Digital warn me if I'm getting out of range?
    Yes. Both transmitter and receiver indicators will flash green and red to indicate you're almost out of range.

  • What is XS Wireless Digital's operating time?
    XS Wireless Digital provides up to 5 hours of operating time.

  • How do I re-charge my system's batteries?
    XS Wireless Digital's built-in lithium ion batteries can be charged by connecting the included charging cable to any USB-A equipped external charging device or computer.

  • Do I need to set my system's input and output levels?
    No, input and output levels have been pre-set to optimum levels - simply plug and play.

  • What do the different indicator colors mean when I power up my system?
    Battery status is indicated by color during power up.
    • Green: over 75% charge remaining
    • Yellow: less than 75% charge remaining
    • Red: less than 5% remaining
    • Blinking red: too low to operate


  • How do I monitor my remaining battery time during use?
    During operation, remaining battery time is shown on the indicator as follows:
    • Red & green blinking: less than 15% charge remaining
    • Rapid blinking, red only: less than 5% remaining


  • Can I buy additional components with different connectors to expand my system?
    Yes, you can purchase additional transmitters or receivers - sold separately - and then pair them to work with your existing system.

  • How do I pair an additional component to my existing system?
    Start with both devices powered off. Press and hold the power buttons on selected transmitter and receiver for (minimum of) 5 seconds to enable pairing on the devices.  Both indicators will flash green and red, then turn solid green when pairing is complete.

  • How many transmitters can I pair with my receiver?
    Up to four transmitters can be paired with a receiver. Note, only one transmitter may be used at a time.

  • Can I send audio from one transmitter to multiple receivers simultaneously?
    No, XS Wireless Digital creates a point-to-point paired connection between a single transmitter and single receiver.

  • The Portable ENG Set comes with two transmitters and one receiver. Can I use both transmitters simultaneously?
    No, only one transmitter can be connected to the receiver at a time. Both transmitters have been pre-paired to the receiver from the factory, enabling plug and play operation with either device.

  • Do I need a license to use this system?
    No, XS Wireless Digital operates in the 2.4GHz frequency range for worldwide license-free use.

  • I lost an accessory. Can I replace it?
    Yes, all XS Wireless Digital accessories are available separately. You can purchase additional transmitters and receivers, belt clips, camera adapters, and connecting cables as needed.

  • What kind of microphones can be used with the XLR plug-on transmitter?
    Any dynamic microphone (or battery-powered condenser microphone) will work with the XLR plug-on.

  • What kind of microphones can be used with the 3.5mm Mini Jack transmitter?
    The 3.5mm Mini Jack transmitter is compatible with most common lapel mics and headmics.

  • Will the Instrument Set work with all styles of guitar and bass pick-ups and plug-styles?
    The 6.3mm (1/4 inch) jack connector has a 90-degree range of motion, allowing it to be plugged into a wide range of instruments with side, top or even recessed input jacks.  In the event that the transmitter does not fit into a specific instrument, an extension cable is provided, which allows the transmitter to be clipped to the strap.

  • Can I use the Ci1 instrument cable with the 3.5mm input on the Mini Jack Transmitter?
    No, the Ci1 instrument cable (included in analog XS Wireless and evolution wireless instrument sets) is not compatible with XS Wireless Digital. For instrument connections via 6.3mm (1/4 inch) jack, please use the dedicated instrument transmitter.

  • Can I connect XS Wireless Digital to my computer via the USB cable?
    XS Wireless components can be charged via a computer's USB port, but audio is not passed to or from a computer via USB.

  • My audio is distorted, what should I do?
    In the unlikely event that your audio distorts, reduce the input level on your mixing board, DSLR camera or other external device. If your equipment offers choice of mic or line level, please select line. For devices offering mic level only, reducing input sensitivity will improve results.  XS Wireless Digital has been designed to provide a clean, robust output signal, but you may need to adjust your external device the default settings on to achieve the best results.

Downloads

  • Transport information for Lithium-Ion batteries
    • Transport information for Lithium-Ion batteries (470 KB) Download

      Revision Date: 2020-02-09 Revision Number: 1.0

  • Quick Guides
    • Quick Guide XS Wireless Digital (1.3 MB) Download

  • Instruction Manual
    • Instruction manual XS Wireless Digital (HTML) Download

      Interactive instruction manual for all products of the Sennheiser XS Wireless Digital series.

  • Spec Sheets
    • Product Specification XS Wireless Digital Instrument Base Set (170 KB) Download

  • EU Declaration of Conformity
    • EU Declaration of Conformity XS Wireless Digital (1.1 MB) Download

  • Manufacturer Declaration
    • Safety instructions, specifications and manufacturer declarations - XSW-D series (760 KB) Download

    • Specifications and manufacturer declarations - XSW-D Pedalboard Receiver (550 KB) Download


  • Similar products